The Model sc100 Controller receives data from one or two sensors. Its plug-and-play, mix-and-match operation lets it fit into any facility or workflow. Digital communication with any Hach digital sensor or probe is simple and reliable.

Features: 

• One Controller for One or Two Sensors
• One controller for One or Two Parameters
• One controller for Many Options
• "Plug and Play" Operation
• Simple, Reliable Data Collection 

Specification Sheet | Manual

sc1000 Display Module, Multi-Parameter Universal Controller

Modular System
The Hach sc1000 Multi-parameter Universal Controller is a fully modular system consisting of a Display Module and one or more Probe Modules. The Display Module and Probe Module must be ordered separately.

Display Module
The sc1000 Display Module is a full-featured controller with a large color touch-screen display. The intuitive, easy to use interface can be used for any number of parameters. One Display Module controls either a single Probe Module or a number of Probe Modules connected by a digital network. The Display Module is fully portable and can be disconnected and moved anywhere within the network. The Display Module must be ordered separately from the Probe Module.

Probe Module
Each sc1000 Probe Module provides power to the system and can accept up to 8 digital sensors. Probe Modules can be networked together to accommodate many more sensors attached to the same network. Only one Display Module is needed for a networked system. The Display Module must be ordered separately from the Probe Module.

Specification Sheet | Manual

 
Available in three ranges:
     0.05-20 mg/l NH4-N
     1-100 mg/l NH4-N
     10-1000 mg/l NH4-N

• Filter Probe sc with 5 Meter Heated Hose
• The kit comes with 3 Month supply of all necessary consumables at 5 minute cycle time
• Fast 5 minute response time including sample preparation
• Environmentally controlled for rugged, outdoor installations
• Designed specifically for easy installation at the measurement point
• Fully featured "Plug & Play" digital controller
• Low Maintenance
  • The probe is equipped with a self-cleaning membrane
  • 3-Month supply of all consumables at the shortest cycle time (5 min)
  • Automatic cleaning and calibration every day
  • Conprehensive self-diagnostics
  • Easy access to reagents and wear parts

Specification Sheet | AMTAX sc Manual | Filter Probe sc Manual

Polypropylene, Convertible, Inductive (Electrodeless) Conductivity Sensor

This inductive (Electrodeless) Conductivity Sensor has Convertible Mounting Style and Polypropylene Body Material.

There are many options for this product, please contact us for details.

Manual

No calibration for one year
• Reduced cleaning frequency and simple maintenance
• 99% accuracy
• No electrolyte solutions to poison or replenish
• No membranes
• Three year probe warranty
• One year sensor warranty

Check out this HACH LDO Faq (PDF)

Specification Sheet | Manual | Sensor Cap Replacement

• UV absorption method-proven, continuous, and precise
• Eliminates reagents, sampling, and sample conditioning
• Self-cleaning probe
• Life-long factory calibration
• Full-featured "plug and play" with sc100 Digital Controller

Specification Sheet | Manual

 
Note: must be connected to a sc100 Universal Controller to form a complete system.

Continuous UV 254 Absorbance/Transmittance measurements can be used to protect plant treatment processes from high organic loads. Analysis range of 1mm probe is 2-3000 m-1. Analysis range of 2mm probe is 0-1500 m-1. Analysis range of 5mm probe is 0.1-600 m-1. Analysis range of 50mm probe is 0.01-60 m-1.

Applications:

• Protection of treatment plants from industrial dischargers
• Monitoring shock loads from internal plant processes
• Control of activated sludge processes
• Control methanol feed in BNR based on organic loading
• Final effluent monitoring
• Monitoring efficiency of UV disinfection processes

Specification Sheet | Manual

• Selectable pH or ORP operation
• Multiple language capability
• Enhanced menu-guided operation
• 1/2 DIN NEMA 4X enclosure
• Universal mounting hardware

Specification Sheet | Manual

GLI pHD sc Differential pH Digital Sensor, Wide Range, PEEK, Convertible Style Sensor

Specification Sheet | Manual

astroTOC UV Turbo TOC Analyzer for Cogen Applications

• Low detection limit of 0.05 mg/L
• Fast 5 minute response time including sample preparation
• Environmentally controlled for rugged, outdoor installations
• Designed specifically for easy installation at the measurement point
• Fully featured "Plug & Play" digital controller
• Low Maintenance
  • The probe is equipped with a self-cleaning membrane
  • 3-Month supply of all consumables at the shortest cycle time (5 min)
  • Automatic cleaning and calibration every day
  • Conprehensive self-diagnostics
  • Easy access to reagents and wear parts

Specification Sheet | Manual

.

• High permeate quality
• Low operating costs
• Continuous air cleaning minimizes cleaning required
• No need for an expensive, high maintenance submersible pump
• Works reliably, even with a high sludge volume index or floating sludge

Specification Sheet | Manual

Specification Sheet | Case History

astroTOC HT TOC Analyzer for Industrial Applications

Reliable high temperature TOC analysis with superior uptime and a lower cost of ownership. Available in ranges of 0-25 up to 20,000 mg/l.

• Battery or A/C Powered.
• Single or Multiple Bottles.
• Highest Sample Integrity for data you can count on.
• Simple to Understand, Efficient to Use.
• Small and Lightweight, handling is made easy.
• Built to last with rugged construction and a sealed controller. 

Specification Sheet | Application Notes | Manual

SOLITAX sc Suspended Solids and Turbidity Analyzer for Immersion in Open Tanks

Note: must be connected to a sc100 Universal Controller to form a complete system.

Reliable high temperature TOC analysis with superior uptime and a lower cost of ownership. Available in ranges of 0-25 up to 20,000 mg/l.

• Includes a sc100 controller and stainless steel ts-line sc Solids and Turbidity Sensor (0.001 mg/L to 50 g/L, 0.001 to 4000 NTU) with wiper
• Measures turbidity or turbidity and suspended solids in drinking water, wastewater, and industrial process applications
• Accurate, color-independent measurements
• Self-cleaning device prevents erroneous values
• Easy one-point calibration
• Any two SOLITAX sc sensors can be installed using one Hach sc100 Controller

Specification Sheet | Manual

Surface Scatter 7 sc High Range Turbidimeter with sc100 Controller

The Surface Scatter 7 sc High Range Turbidimeter with sc100 controller offers superior performance features:

• Virtually maintenance-free, optics never touch the sample
• Wide turbidity measurement range; measures turbidity from 0 to 9999 NTU
• Durable-manufactured with corrosion-resistant materials
• Note: only one SS7 sc sensor can attach to one sc100 controller, if a second different sc sensor is required for this configuration please contact the Hach Company - Process Technical Group for further details.

Specification Sheet | Manual

Sensor, 2 mm, with sc100 Controller

• Protection of treatment plants from industrial dischargers
• Monitoring shock loads from internal plant processes
• Control of activated sludge processes
• Control methanol feed in BNR based on organic loading
• Final effluent monitoring
• Monitoring efficiency of UV disinfection processes

Specification Sheet | Manual