ON-OFF Level Alarm Switches w Continuous Level Monitors/Transmitters w Multi-Tank Level Systems w % Oil in Water w Floating Oil Monitor w Oil/Water Separator Monitor w Open Channel Flow Monitor

Specification Sheet | Manual

High and Low Level Alarm

The 9820 and 9830 sensing probe monitors the capacitance field around the active probe. As the volume of product increases in the vessel, the probe capacitance changes. This change is used to activate the relay for a high or low alarm. A two point calibration can be set to control a differential between two points along the probe for pump or valve cycling.

Features:

•no moving parts
•remote electronics via standard twisted pair with the 9830
•available with Intrinsic Safety Barrier for Hazardous Locations on the 9830
•9820 can be integral to the probe
•high corrosion resistant Teflon and stainless steel wetted parts
•capacitance technology responds to all product types
•HF capacitance technology does not require routine cleaning
•easy calibration and control set-up 

Specification Sheet | Manual

The 9080 sensing probe monitors the capacitance field around the active probe. As the volume of product increases in the vessel, the probe capacitance changes. A 4-20 mA output signal is provided for interface with customer controls and systems. A quick calibration can be set at any two points along the probe length.

Features: 

•no moving parts
•electronics is integral to the probe
•high corrosion resistant Teflon and stainless steel wetted parts
•capacitance technology responds to all product types
•HF capacitance technology does not require routine cleaning
•easy calibration and control set-up 

Specification Sheet | Manual

The float switch 7030 belongs to a new generation of float switches where the mercury switches used previously have been replaced with up-to-date environment-friendly materials.

 Float switches are often used in environmental engineering systems such as pumping stations and sewage plants, so it is very important that the switches do not contain mercury.

Specification Sheet

Shuttle® Ultrasonic Level Transmitter for level measuring in tanks, wells, containers etc. Shuttle® Ultrasonic Level Transmitter is very easy to install and operate.

Characteristics

- Ultrasonic measuring system with measuring ranges from 10 cm to 25 metres.
- Learning function, so the level meter recognizes how the wetwell is arranged with pumps, piping and other disturbing elements.
- The measurement will not be affected by false echos.
- Very narrow ultrasonic pulse signal gives great signal strength and minimum sensitivity to foam and sludge on the surface of the liquid.

Specification Sheet | Manual

MJK offers a full series of pressure transmitters designed for immersion in open tanks and reservoirs. The pressure transmitters are designed for measurement under the worst possible conditions in all water and waste water applications with large concentrations of sludge and suspended solids The transmitters are rugged and designed to handle tough applications such as wastewater and sludges.
 
Specification Sheet | Manual

Telog’s WLS-31 Level Tracker measures water level with a data logger and pressure sensor. Everything you need to measure water level comes in one complete package, pre-assembled and calibrated. Data is retrieved via Telog’s DTU or a portable computer operating Telogers for Windows software.

The WLS-31 installs in a 2" pipe and is ideal for: Aquifer characterization; Environmental remediation; Well level recording; Tank level recording; CSO/SSO overflow; Unattended in-well applications. The WLS-31 features an automatic barometric pressure connection and runs on a battery, with a 7-year recorder battery life, and a 1-2 year sensor battery life.
 
Brochure | Specification Sheet