• Completely automated analyzer auto-calibrates, set-and-forget operation frees time for other tasks
• Very low maintenance analyzer is self-cleaning, self-calibrating, and self-priming; reduced sample volume minimizes reagent use and allows instrument to run up to 30 days in clean water applications before maintenance and reagent replenishment
• Advanced process control two 4-20 mA outputs and two alarm relays allow quick configuration into standard PID control loop. Can be expanded up to 14 4-20 mA outputs and 14 alarm relays
• Constant protectionfast, accurate response minimizes process excursions
• Accurate alkalinity determinations to 500 mg/L as CaCO3
• Readout selectable as total or phenolphthalein
• Easy grab sample measurements without interrupting sample flow or disrupting datalogging
• Optional sample sequencing kits allow a single instrument to monitor two separate sample streams

Specification Sheet | Manual

• Minimal sample, reagent and standard consumption
• Auto calibration, priming and cleaning
• Grab sample capability
• Menu-driven digital user interface
• Datalogging of measurements for up to 30 days

Specification Sheet | Manual

• 0 to 5 mg/L range, dual, fully-adjustable set-point alarms
• IP62 enclosure rating, suitable for indoor installation
• Automatic, self-testing diagnostics
• Minimal routine maintenance required
• Colorimetric DPD chemistry - fast, reliable, economical
• Unattended operation up to 30 days
• Manual or automatic feed pump control

Specification Sheet | Manual

Chlorine Dioxide Analyzer with sc100 controller

Features: 

• Reagentless anlaysis of chlorine dioxide - ion-selective membrane separates electrolyte from sample water
• All-inclusive, pre-assembled panel reduces installation expense
• Plug & play with digital controllers simplifies setup
• Built-in flow regulation reduces need for additional accessories
• Integral temperature sensor provides more accurate readings
• Includes 2 years of typical maintenance parts, reduces operating costs

Specification Sheet | Manual

• For filter analysis optimization
• Volumetric all particles pass through the sensing area
• Supports up to 32 size channels and 8 analog inputs (turbidity, pH, etc.)
• Operates stand-alone or as part of a networked system

Specification Sheet | Manual

• Measures low-range hardness using USEPA-approved calmagite chemistry
• Range 50 to 10,000 ug/L
• Accurately and continuously measures up to two sample streams
• Operates unattended for one month
• Virtually maintenance-free
• Makes your water softening system more efficient and less costly

Specification Sheet | Manual

Ozone Analyzer with sc100 controller

• Great for readings in low conductivity water with no interferences from oxidants or pH
• Reagentless anlaysis of ozone - ion-selective membrane separates electrolyte from sample water
• All-inclusive, pre-assembled panel reduces installation expense
• Plug & play with digital controllers simplifies setup
• Built-in flow regulation reduces need for additional accessories
• Integral temperature sensor provides more accurate readings
• Includes 2 years of typical maintenance parts

Specification Sheet | Manual

• For filter analysis optimization
• Volumetric all particles pass through the sensing area
• Supports up to 32 size channels and 8 analog inputs (turbidity, pH, etc.)
• Operates stand-alone or as part of a networked system

Specification Sheet | Manual

Phosphate Analyzer, 0.05-15mg/l PO4-P, 115V, 5m Filter Probe sc

• Low detection limit of 0.05 mg/L
• Fast 5 minute response time including sample preparation
• Environmentally controlled for rugged, outdoor installations
• Designed specifically for easy installation at the measurement point
• Fully featured "Plug & Play" digital controller
• Low Maintenance
  • The probe is equipped with a self-cleaning membrane
  • 3-Month supply of all consumables at the shortest cycle time (5 min)
  • Automatic cleaning and calibration every day
  • Conprehensive self-diagnostics
  • Easy access to reagents and wear parts

Specification Sheet | Manual

astroTOC UV Turbo TOC Analyzer for Cogen Applications

• Response time less than 5 minutes with 100% oxidation
• Sample composition and oxidation by-products do not interfere
• Uses proven NDIR technology with supreme accuracy at low levels
• Advanced diagnostics and features designed for ease of use

Specification Sheet | Manual

astroTOC HT TOC Analyzer for Industrial Applications

Reliable high temperature TOC analysis with superior uptime and a lower cost of ownership. Available in ranges of 0-25 up to 20,000 mg/l.

• Battery or A/C Powered.
• Single or Multiple Bottles.
• Highest Sample Integrity for data you can count on.
• Simple to Understand, Efficient to Use.
• Small and Lightweight, handling is made easy.
• Built to last with rugged construction and a sealed controller. 

Specification Sheet | Application Notes | Manual

• UV absorption method-proven, continuous, and precise
• Eliminates reagents, sampling, and sample conditioning
• Self-cleaning probe
• Life-long factory calibration
• Full-featured "plug and play" with sc100 Digital Controller

Specification Sheet | Manual

Sensor, 2 mm, with sc100 Controller

• Protection of treatment plants from industrial dischargers
• Monitoring shock loads from internal plant processes
• Control of activated sludge processes
• Control methanol feed in BNR based on organic loading
• Final effluent monitoring
• Monitoring efficiency of UV disinfection processes

Specification Sheet | Manual